Description:
8 port Embedded 10/100 PHY Switch Controller
Support 8 100BaseTX or 6 100Base TX + 2 FX
Support Auto MDI-MDIX function
Power Management Tool (PWMT®): APS, auto-power saving while Link-off, IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps, WOL+®, light traffic power saving, PWD, force-off power saving
Features:
Support Auto Factory Test (AFT®), Single Power 3.3V supply
Built in Vcore Regulator, Two Priority queues per port, Support 802.1p & DiffServ based QoS
QoS: Port base,802.1p, IP DiffServ IPV4/IPV6, TCP/UDP port number, Pins configure ports priority (VIP port)
Support max forwarding packet length 1552/1536 bytes option
Support port mirror function, Support 1k MAC address
Support broadcast storm protection
Support port trunking (LACP)
Support 16 VLAN (IEEE Std 802.1q): Port-based/Tagged-based VLAN, Support insert, remove tag
Built-in 50 ohm resistors for simplifying BOM: 85nm Process, Package and operation temperature, IP178G: 68 Pin QFN, 0~70℃
Specifications:
Port number: 8 port 10/100M RJ45
Standard: IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3az
Network media: 10Base-T,cat3 or above UTP,10Base-Tx,cat5 UTP
Data rate: 10/100M
Forwarding rate: 10 Mbps / 14,880 pps ,100 Mbps / 148,800 pps
LED Indicator: 10/100Mbps(Link/Act) and Power
Dimension: 123 x 56 x 21mm
Power Input: DC5V/500mA
Power Consumption: Max1.5W
Environment:
Operating Temperature: 0 ℃-40 ℃
Relative Humidity: 10%-90%(non-condensing)
Storage Temperature: -40℃-70℃
Relative Humidity: 5%-90%(non-condensing)
Package Included:
1 x 8 Port Network Switch
8 port Embedded 10/100 PHY Switch Controller
Support 8 100BaseTX or 6 100Base TX + 2 FX
Support Auto MDI-MDIX function
Power Management Tool (PWMT®): APS, auto-power saving while Link-off, IEEE 802.3az protocol based power saving & 10Mbps Te for 10Mbps, WOL+®, light traffic power saving, PWD, force-off power saving
Features:
Support Auto Factory Test (AFT®), Single Power 3.3V supply
Built in Vcore Regulator, Two Priority queues per port, Support 802.1p & DiffServ based QoS
QoS: Port base,802.1p, IP DiffServ IPV4/IPV6, TCP/UDP port number, Pins configure ports priority (VIP port)
Support max forwarding packet length 1552/1536 bytes option
Support port mirror function, Support 1k MAC address
Support broadcast storm protection
Support port trunking (LACP)
Support 16 VLAN (IEEE Std 802.1q): Port-based/Tagged-based VLAN, Support insert, remove tag
Built-in 50 ohm resistors for simplifying BOM: 85nm Process, Package and operation temperature, IP178G: 68 Pin QFN, 0~70℃
Specifications:
Port number: 8 port 10/100M RJ45
Standard: IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3az
Network media: 10Base-T,cat3 or above UTP,10Base-Tx,cat5 UTP
Data rate: 10/100M
Forwarding rate: 10 Mbps / 14,880 pps ,100 Mbps / 148,800 pps
LED Indicator: 10/100Mbps(Link/Act) and Power
Dimension: 123 x 56 x 21mm
Power Input: DC5V/500mA
Power Consumption: Max1.5W
Environment:
Operating Temperature: 0 ℃-40 ℃
Relative Humidity: 10%-90%(non-condensing)
Storage Temperature: -40℃-70℃
Relative Humidity: 5%-90%(non-condensing)
Package Included:
1 x 8 Port Network Switch
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
You may also like
More from EY-2S 3 2/4
Recently viewed